Workplace on the road
Writing quotes on the bonnet and stripping cables on your knee? Fold out your workbench and work comfortably, right in your van.
View solution →
Never without power again
Clayton Power inverter for your van: 230V on every job site
With a Clayton Power inverter for your van you always have electricity, anywhere. The all-in-one lithium system delivers 230V and 12V at the same time, charges while driving via your alternator (500W / 45A) and runs completely silently, without the engine running.
→ Request a quoteVanaf€1500excl. btwstroomvoorziening
Power where you work
The nearest socket? Your own load area
You're on site, your battery is flat and the nearest socket is a hundred metres away. Or worse: the meter isn't connected yet and there simply is no power.
The Clayton Power inverter for your van solves that for good. The lithium system delivers 230V and 12V simultaneously and effortlessly powers a compressor, angle grinder or welding equipment. Protected against overload and short circuit, and permanently built into your fit-out. That turns your van into a fully fledged workplace on the road.
Did you know… the system delivers 230V and 12V at the same time? Your machine runs while your work lighting simply stays on.
Driving is charging
Charges while you drive, simply on the road
An energy system that is empty when you need it is no system at all. You want power that is simply there, without having to think about it.
That is why the Clayton Power charges via your alternator at 500W (45A), simply while you drive. Every trip between two jobs tops up your battery. If you stand still for longer, the built-in 400W MPPT solar charge controller keeps charging via solar panels on your roof. Easy to combine with work lighting for your van: light and power from the same battery.
Did you know… your Clayton Power charges while driving via the alternator? Every trip between two jobs is charging time that costs nothing.
Quiet, clean and allowed everywhere
No running engine, no noise, no emissions
A roaring generator on your customer's driveway, or an engine idling for hours: noise, emissions and fuel ticking away. Working indoors isn't even an option.
The Clayton Power runs completely silently and without emissions. No idling engine means saving fuel and CO2, and you can work indoors with it too. Do you drive electric? Then this system is doubly interesting: your machines run on the Clayton battery and not on your traction battery, so your range stays intact.
Did you know… the system works without an idling engine? That saves fuel and CO2, and it stays quiet on site.
A generator after all?
Forget the petrol generator: lithium wins every working day
A generator has to be filled, started, put outside and put up with. It stinks, makes noise and using it indoors is out of the question.
The Clayton Power is built permanently and made to measure into your fit-out: no loose case sliding around, just sockets in your load area. It starts instantly, runs noiselessly and is protected against overload and short circuit. Combine it with a mobile workbench and your load area is a fully fledged workshop, even where there is no power.
Did you know… the Clayton Power is built permanently and made to measure into your fit-out? Sockets in your load area, as if they had always been there.
Technical details
Specifications that prove themselves every working day
The Clayton Power comes in several capacities. Which one you need depends on your machines and your working day: we work that out together in your quote.
| Vermogen & aansluitingen | |
|---|---|
| Outputs | 230 VAC and 12 VDC simultaneously, machines and lighting together. |
| Suitable for | compressor, angle grinder and welding equipment: real work equipment. |
| Protection | against overload and short circuit, built in. |
| Charging | |
| Via the alternator | 500W (45A): charges while you drive. |
| Via solar power | built-in 400W MPPT solar charge controller, also charges while stationary. |
| Operation | |
| Technology | lithium-ion, all-in-one system. |
| Noise and emissions | completely silent and emission-free, without an idling engine. |
| Inbouw & service | |
| Installation | permanent and made to measure in your fit-out, expertly fitted. |
| Capacity | several models, matched to your consumption in your quote. |
| Service | repairs through Guntro. |
Fits your van
For which brands and models?
We build the Clayton Power made to measure into just about any van, from L1H1 to L3H3. Choose your brand and see the fit-out that suits your model.
BYD
Citroën
Fiat
Ford
Iveco
KIA
MAN
Maxus
Mercedes-Benz
Nissan
Opel
Peugeot
Renault
Toyota
Volkswagen
Don't see your brand? We fit out just about any brand and model. See all brands and models.
From problem to solution
This is what you solve with Clayton Power
A Clayton Power inverter for your van is rarely an end in itself. These are the problems it solves every day.
Work lighting
Fumbling around in the load space with a torch between your teeth? LED lighting gives you both hands back, even at 6 in the morning.
View solution →New
Increase your EV range ECO
Do you drive electric? A light aluminium fit-out saves payload weight, so you get more kilometres from every battery charge and more payload left over.
View solution →Often fitted together
Combines perfectly with these products
Power is the engine of your mobile workplace. This is how you complete it.
Mobile workbench
An ergonomic workstation that you take with you anywhere in your van.
View product →
Modules & fit-outs
Modular storage cabinets that you build up and expand as you wish. Suitable for growing businesses.
View product →
Accessories
Complete your fit-out with magnetic strips, holders and case compartments. Everything within arm's reach, set up the way you work.
View product →
All your questions answered
Frequently asked questions about a Clayton Power inverter for your van
What does a Clayton Power inverter for your van cost?
The price of a Clayton Power inverter for your van depends on three factors: the battery capacity, the power your machines require and the installation in your fit-out.
- Capacity: how many hours you want to work without recharging.
- Power: a welding station needs more than a laptop and a charger.
- Installation: the position of the sockets and the integration in your fit-out.
That is why we work with a made-to-measure quote: that way you know exactly where you stand, with no obligation and no duty to buy.
Which machines can I connect to the Clayton Power?
The system is made for professional equipment: a compressor, angle grinder and even welding equipment run on it. It delivers 230V and 12V at the same time.
Tell us with your quote which machines you use, and we will calculate which model suits your consumption.
How fast does the Clayton Power charge?
Via the alternator the system charges at 500W (45A) while you drive. Every trip between jobs therefore tops up your battery.
The system also has a built-in 400W MPPT solar charge controller, so you can charge while stationary via solar panels too.
Does the system work when the engine is off?
Yes, that is exactly the point. The Clayton Power runs on its own lithium battery, completely silently and without emissions, while your engine simply stays off.
No idling engine means saving fuel and working without noise, even indoors.
Can I connect solar panels?
Yes. The 400W MPPT solar charge controller is built in as standard. Solar panels on your roof charge the battery while you work.
That way you also start with a full battery after a day standing still.
Is the Clayton Power interesting for my electric van?
Yes, even extra interesting. Your machines run on the Clayton battery and not on your traction battery, so your range stays intact.
You have power on site without sacrificing your driving range, and without having to charge extra on the way.
How much capacity do I need?
That depends on your machines and the number of hours you want to work without recharging. A charger and lighting need little, a compressor or welding station quite a lot more.
The Clayton Power comes in several models. With your quote we add up your daily consumption and choose the right capacity.
What about warranty and defects?
On your fit-out you get a 5-year full fit-out warranty, and repairs go through Guntro. We confirm the exact warranty period of the Clayton Power system itself in your quote.
That way you know exactly where you stand in advance, in black and white.
Can I see the Clayton Power in operation first?
Yes, and we recommend it: power from your own load area is something you have to experience.
Isn't a petrol generator a cheaper alternative?
To buy, sometimes, but a generator needs fuel, makes noise, produces emissions and may not be used indoors. And it doesn't charge itself while you drive.
The Clayton Power is silent, emission-free, permanently built in and charges automatically via the alternator and solar power. You notice the difference every working day, and so does your customer.
Your work van, complete under one roof
Request your quote with no obligation. Together we look at what your van needs: from fit-out to lettering.
What customers say
Read all reviews on Google
4.3 on Google, 63 reviews
We just had our newest van fitted out here. Very good value for money, and the communication and follow-up went smoothly too. Definitely recommended!
Good service, great quality!
Perfect work and a very fair and friendly service!